RXU1201DSH

RXU1201DSH – 5‑axis machine

Maschine RXU1201DSH

With QUADROGUIDE® for high rough­ing capac­i­ty, dynam­ics and precision

  • All axes with direct drives
  • Milling spin­dle may be cho­sen depend­ing on the appli­ca­tion, up to 101 Nm (S1) available
  • Ide­al for forg­ing dies, mould and die mak­ing, aero­space indus­try, med­ical appli­ca­tions, machine pro­duc­tion and part manufacturing
Tech­ni­cal data
Machin­ing range1000 mm x 1050 mm x 600 mm
Swiv­el­ling range+/-115 degrees (oth­ers on request)
Rota­tion rangeAlmost unlim­it­ed
Table size625 mm round or 625 mm square,
895 mm round with two flat­tened sides or 895 mm round
Work­piece weightmax. 1,500 kg
Feed0–60,000 mm/min
Milling spin­dle (stan­dard)24,000 rpm, 67 Nm (S1), HSK A63,
max­i­mum tool diam­e­ter 35 mm (oth­ers on request)
Tool chang­er50, option­al 90 or more places
(chain chang­er – can be loaded dur­ing machin­ing)
inte­grat­ed mea­sur­ing laser
Chip dis­pos­alWith 4 screws in the machin­ing area into chip box
or chip con­vey­or behind the machine
Machine weight~33.0 t
Required spaceW 4205 mm x L 5431 mm (depend­ing on con­fig­u­ra­tion) x H 4000 mm
Innenraum RXU1201DSH
Machin­ing area RXU1201DSH
  • High­ly effi­cient due to high stiff­ness and opti­mum lay­out of the mass inertia
  • Two-sided sup­port of the C‑axis for high sta­bil­i­ty and precision
  • Counter bear­ing dimen­sioned for up to 20 t load
  • High res­o­lu­tion opti­cal encoders in all axes
  • Pow­er­ful wear-free direct dri­ves in all axes
  • Spe­cial Roed­ers 5‑axis geom­e­try com­pen­sa­tion for high pre­ci­sion, also at long last­ing machin­ing operations
  • Pre­cise tem­per­a­ture con­trol of machine components
  • For dynam­ic decou­pling, the swiv­el­ling direc­tion is at right angles to the X axis
  • Win­dows very close to the machin­ing area, vis­i­ble from two sides
  • Chucks for dif­fer­ent pal­let sys­tems can be inte­grat­ed into the C‑table

Down­load Stroke posi­tion RXU1201DSH — 82 kB

Down­load Floor­plan RXU1201DSH — 141 kB