
Machining of glass and ceramics


Glass prisms
Machining of optical glass prisms with extreme angular precision below 2 arc seconds, also for large prisms. Roughing and finishing in one set-up on 5‑axis and respectively 3‑axis machine

Test workpiece for flow cell made of zirconium oxide,
stabilized ZrO2 – Y2O3, about 25 mm x 25 mm, Vickers hardness HV 10: 13 GPA

Machining of glass for medical applications
Also very tiny contours, e.g. fluid channels, may be machined with high precision in glass.


Sample part for glass machining
Free form surfaces and other contours machined into a glass workpiece in one set-up