RPT600

Roeders Precision Technologies –
RPT600

Roeders of America PRECITEMP - machine RPT600

Image sim­i­lar

Milling, grind­ing, mea­sur­ing in one machine

  • Sev­er­al years of ground­break­ing devel­op­ments are the foun­da­tion of the RPT series
  • Max­i­mum pre­ci­sion, even bet­ter sur­faces and short­er pro­cess­ing times lead to sig­nif­i­cant increas­es in pro­duc­tiv­i­ty in mould and die mak­ing as well as pro­duc­tion applications
  • PRECITEMP®-Tech­nol­o­gy in the dif­fer­ent lev­els I, II and III for high­est pre­ci­sion also if ambi­ent tem­per­a­tures of the machine are not stable
  • All options known from the RXP series are ful­ly available

Roeders of America graph PRECITEMP lateral movement
“Qua­si hydro­sta­t­ic run­ning char­ac­ter­is­tics”
of the lin­ear guideways

The dis­ad­van­tage of roller guide­ways com­pared to hydro­sta­t­ic guide­ways is that they run less smooth­ly. In this regard, a quan­tum leap could be achieved in coop­er­a­tion with a well-known roller guide­way man­u­fac­tur­er, which results in con­sid­er­able advan­tages, espe­cial­ly for high sur­face require­ments. The gen­er­ous dimen­sion­ing of the guide­ways ensures long durability.


Roeders of America PRECITEMP machine - durability and efficiency
Dura­bil­i­ty and ener­gy efficiency

The RPT series was designed for dura­bil­i­ty and ener­gy effi­cien­cy down to the last detail.
The con­trol cab­i­net is usu­al­ly inte­grat­ed into the machine tool. For the RPT series, the elec­tri­cal cab­i­net stands alone next to the machine so that elec­tron­ic com­po­nents are not affect­ed by vibra­tions from machin­ing or the dynam­ics of the machine. In addi­tion, the high weight of the machine and the large dis­tance between the machine feet ensure low stress despite the high dynam­ics of the axes. Numer­ous mea­sures have been under­tak­en to sig­nif­i­cant­ly reduce ener­gy con­sump­tion, e.g. a pow­er-con­trolled cool­ing unit.


Tech­ni­cal data
Machin­ing range630 mm x 530 mm x 300 mm
Table size600 mm x 500 mm, T‑slots 14 mm
Clamp­ing unitErowa UPC / Sys­tem 3R Dynafix / Parotec Pow­er Grip 160
Work­piece weightmax. 400 kg
Feed0–60,000 mm/min
Milling spin­dle (stan­dard)42,000 rpm, 14 kW, HSK E40,
max­i­mum tool diam­e­ter 16 mm, oth­ers on request
Tool chang­er42 or 87 places for HSK E40,
option­al larg­er chang­er avail­able,
inte­grat­ed mea­sur­ing laser
Chip dis­pos­alWith 2 screws into chip box behind the machine
or with addi­tion­al chip conveyor
Machine weight~8.8 t
Required spaceW 2200 mm x L 2500 mm x H 2540 mm

Down­load Floor­plan RPT600