Parts Production

Parts Production

With Roeders machines, you reliably and permanently hold very small tolerances in the parts production.

If nec­es­sary, milling and grind­ing may be com­bined in one set-up for opti­mal results. The PRECITEMP® tech­nol­o­gy devel­oped by Roed­ers over many years ensures a ther­mal­ly robust machine struc­ture, so that no ther­mal drifts occur even if ambi­ent tem­per­a­tures are fluc­tu­at­ing and the machine zero points remain sta­ble and unchanged. In this way, con­di­tions for a high­ly effi­cient automa­tion with low­est staff require­ments become pos­si­ble. Roed­ers offers numer­ous han­dling devices and soft­ware solu­tions that have been proven for many years.

Throttle valve housing

Tol­er­ances down to 0.01 mm, sur­face qual­i­ty Ra 0.2 µm

---

Highly precise cylindrical ground parts

The com­bi­na­tion of milling and grind­ing leads to high pre­ci­sion in parts pro­duc­tion espe­cial­ly for cylin­dri­cal grind­ing appli­ca­tions, also with larg­er grind­ing wheels.

---

Housing for a hydraulic pump

Tol­er­ances of the “dou­ble holes” (posi­tion and round­ness) < 1 µm

---

Watch mainplates

Pre­cise­ly and burr-free machined; con­sis­tent­ly high, repeat­able qual­i­ty and accu­ra­cy thanks to direct dri­ve tech­nol­o­gy in all axes

---

Camshaft

Pro­duced by milling and grind­ing in one set-up, tol­er­ances small­er than 1 µm

---

Axle beam

Pro­duced in a sin­gle set-up on a 5‑axis machine

---

Housing of a jaw scanner

High sur­face qual­i­ty for coat­ing necessary

---

---

Small batches and prototypes

Hous­ing for elec­tri­cal components

---

---

Design study

Fin­ish-machined in one set-up from 5 sides