RXU1001 / RXU1001DSH

RXP1001 / RXU1001DSH

RXU1001DSH
  • High­ly rigid, but still dynam­ic design
  • Good rough­ing per­for­mance, depend­ing on the spin­dle selected
  • Often designed as a twin-spin­dle machine with an air-bear­ing spin­dle for very high sur­face fin­ish requirements
  • Largest spin­dle with HSK A63 inter­face, 102 Nm (S1)
RXU1001DSH Innenraum – Machining area
Rotary-swiv­el unit of the RXU1001DSH

Rotary-swiv­el unit of the RXU1001DSH: Var­i­ous machine tables are avail­able, includ­ing those with inte­grat­ed clamp­ing chucks for pal­let load­ing. For grind­ing, the aux­il­iary equip­ment is mount­ed at the A‑axis.

Tech­ni­cal dataRXU1001RXU1001DSH
Machin­ing range1000 mm x 810 mm x 500 mm800 mm x 855 mm x 500 mm
Swiv­el­ling range–+/-115 degrees (oth­ers on request)
Rota­tion range–Almost unlim­it­ed
Table size996 mm x 796 mm400 mm round or 400 mm square, 600 mm round with two flat­tened sides or 600 mm round
Work­piece weightmax. 2,000 kgmax. 800 kg
Feed0–60,000 mm/min0–60,000 mm/min
Milling spin­dle (stan­dard)24,000 rpm, 67 Nm (S1), HSK A63, max. tool diam­e­ter 35 mm (oth­ers on request)
Tool chang­er24, option­al 40, 75 or more places (chain chang­er – can be loaded dur­ing machin­ing), inte­grat­ed mea­sur­ing laser
Chip dis­pos­alWith 2 screws into chip box behind the machine or with addi­tion­al chip conveyor
Machine weight~19.5 t~21.0 t
Required spaceW 4120 mm x L 4910 mm (depend­ing on con­fig­u­ra­tion) x H 3300 mmW 4120 mm x L 4910 mm (depend­ing on con­fig­u­ra­tion) x H 3600 mm

Down­load Stroke posi­tion RXU1001DSH

Down­load Floor­plan RXU1001

Down­load Floor­plan RXU1001DSH